|
 |
Double-Wide
Hoops for Bernina Aurora 440, 640, 630 & 430 Machines
4
Hoops to choose from or buy them all for incredible versatility! |
|
|
|
How
can your sewing machine use these hoops?
With a specially
designed spacing base, we s-t-r-e-t-c-h your sewing machine apart!
See how much larger your sewing field is!
The hoop pictured above is the Giant Double-Wide hoop.
The Super Giant Double-Wide is even larger!
Important:
- You must know how to use the
software for your machine in order to use the hoops to their fullest potential. In order
to fill in a complete hoop with a SOLID design, you must SPLIT designs so that the machine
will accept the design. Until you have a complete understanding of your software you CAN
use these hoops for simplified hooping and extra length.
- You must use our support
table with the specially designed base in order to stretch the machine to the exact limit
and to support the ennormous size of these hoops. Failure to use the recommended support
table and base with these hoops can damage your machine's embrdoidery unit.
- Your work area must be
large enough to hold the spacing base and to allow for the hoop to slide all the way
forward and all the way back. To prepare your workspace be sure to have an area cleared
that measures: 30" wide by 38" long.
Giant Double-Wide Hoop Support Table and Spacing Base
 |
With Hoop-It-All's
patented Sliding bracket you are able to slide the hoop within the bracket to move from
one sewing field to the next without the need to re-hoop your fabric. All of the following hoops, including the Big
hoop that also embroiders on baseball caps use the same Attachment Bracket...So you only
need 1 complete kit and then you can buy the other hoop frames separately to increase your
hoop selection. |
These are
Deluxe Kits. If comparing against other retailers prices, be sure that you compare the
Deluxe kit price. We do not sell the standard kit because it has been determined un-safe
for your machine to use the smaller table and we look out for our customers because we
value you.
The following Deluxe hoop kits include the Deluxe Large front
& back table supports and fill in the space between the Embroidery Unit and Machine. If you are comparing our prices to other sites on the Internet be sure that you are comparing the correct kits. We do not sell the Standard Double Wide kits because it has been proven that it is not safe for your machine to use the smaller table front and back with the Double-Wide Base. |
|
| |
|
| |
|
|
|
| |
Frames Sold separately can only be used if you already have the
Spacing base, Support table & attachment Bracket. If you do not, refer to the kits
above and then you can accessorize by purchasing additional hoops below. All 3 hoop frames
fit into the same bracket and use the same support table. |
Accessories sold Separately |
You
can also order the Big hoop with cap sewing feature
This hoop replaces the
large hoop for your machine and makes it so you can sew a larger design than you currently
can with the machine's large hoop. You can also use this hoop to embroider small designs.
 |
|
If you have or are buying any of the 3 Double Wide hoop Kits you do not need an
additional bracket and should order the one below. |
|
|
Order
Replacement rolls of SIA now to save on shipping costs.
- Order
14.5" wide SIA for all three of the Double Wide hoops.
- Order
8.5" wide SIA for the Big hoop.
|
|
