Sewing Machine Feet - Sewing Supplies - Notions

Hoops for Brother Innovis 2500D & 1500D Machines

Normally the Babylock Ellageo machines and the Brother models listed above can share the same hoops. However because the machines are shaped differently, you must at least have 2 separate spacing bases for the machines in order to share hoops.

3 Hoops to choose from or buy them all for incredible versatility!

How can your sewing machine use these hoops?

With a specially designed spacing base, we s-t-r-e-t-c-h your sewing machine apart! In addition to a factory approved extension cord that tricks your machine into thinking it is connected the normal way.

See how much larger your sewing field is!
The hoop pictured above is the Giant Double-Wide hoop.
The Super Giant Double-Wide is even larger!

Important:

You must know how to use the software for your machine in order to use the hoops to their fullest potential. In order to fill in a complete hoop with a SOLID design, you must SPLIT designs so that the machine will accept the design. Until you have a complete understanding of your software you CAN use these hoops for simplified hooping and extra length.
You must use our support table with the specially designed base in order to stretch the machine to the exact limit and to support the ennormous size of these hoops. Failure to use the recommended support table and base with these hoops can damage your machine's embrdoidery unit.

Your work area must be large enough to hold the spacing base and to allow for the hoop to slide all the way forward and all the way back. To prepare your workspace be sure to have an area cleared that measures: 30" wide by 38" long.

Double-Wide Hoop Spacing Base with Extension Cord and Deluxe Front & Back Table Supports


Back table is removed, machine slid back and front table supports hoop in front as you embroider the first section of the hoop.		Front table is removed, machine slid forward, hoop is slid back within the sliding bracket. Back table supports hoop as you embroider the second section of the hoop.

Back table is removed, machine slid back, hoop is removed from within the sliding bracket. Both the hoop and the designs are rotated 180 degrees. Hoop is re-inserted into sliding bracket and the front table supports hoop as you embroider the third section of the hoop.		Front table is removed, machine slid forward, rotate design 180 degrees. Hoop is slid within sliding bracket back and the back table supports hoop as you embroider the final section of the hoop.

If your table is large enough to leave both the front and back sections of the table in-place simply disregard the table refrences on the above instructions.

With Hoop-It-All's patented Sliding bracket you are able to slide the hoop within the bracket to move from one sewing field to the next without the need to re-hoop your fabric. You are allowed to slide the hoop anywhere within the bracket making it simple to to position designs on fabric.

All of the following hoops, excluding the Big hoop that also embroiders on baseball caps use the same Attachment Bracket...So you only need 1 complete kit and then you can buy the other hoop frames separately to increase your hoop selection.

Frames Sold separately can only be used if you already have the Spacing base, Support table & attachment Bracket. If you do not, refer to the kits above and then you can accessorize by purchasing additional hoops below. All 3 hoop frames fit into the same bracket and use the same support table.

Accessories sold Separately

You can also order the Big hoop with cap sewing feature

This hoop replaces the large hoop for your machine and makes it so you can sew a larger design than you currently can with the machine's large hoop. You can also use this hoop to embroider small designs.

Order Replacement rolls of SIA now to save on shipping costs.

Order 14.5" wide SIA for all three of the Double Wide hoops.
Order 8.5" wide SIA for the Big hoop.