|
 |
Hoops
for Babylock Ellageo Model Machines (Not
Ellageo3 BLM)
Normally the Babylock
Ellageo machines and the Brother ULT machines can share the same hoops. However because
the machines are shaped differently, you must at least have 2 separate spacing bases for
the machines in order to share hoops.
3 Hoops to choose
from or buy them all for incredible versatility! |
|
|
|
How
can your sewing machine use these hoops?
With a specially
designed spacing base, we s-t-r-e-t-c-h your sewing machine apart! In addition to a
factory approved extension cord that tricks your machine into thinking it is connected the
normal way.
See how much larger your sewing field is!
The hoop pictured above is the Giant Double-Wide hoop.
The Super Giant Double-Wide is even larger!
Important:
- You must know how to use the software for
your machine in order to use the hoops to their fullest potential. In order to fill in a
complete hoop with a SOLID design, you must SPLIT designs so that the machine will accept
the design. Until you have a complete understanding of your software you CAN use these
hoops for simplified hooping and extra length.
- You must use our support
table with the specially designed base in order to stretch the machine to the exact limit
and to support the ennormous size of these hoops. Failure to use the recommended support
table and base with these hoops can damage your machine's embrdoidery unit.
- Your work area must be
large enough to hold the spacing base and to allow for the hoop to slide all the way
forward and all the way back. To prepare your workspace be sure to have an area cleared
that measures: 30" wide by 38" long.
Double-Wide Hoop
Spacing Base with Extension Cord and Deluxe Front & Back Table Supports
 |
If your table is large enough to leave both the
front and back sections of the table in-place simply disregard the table refrences on the
above instructions. |
|
With Hoop-It-All's patented
Sliding bracket you are able to slide the hoop within the bracket to move from one sewing
field to the next without the need to re-hoop your fabric. You are allowed to slide the
hoop anywhere within the bracket making it simple to to position designs on fabric. |
All of the following hoops, excluding
the Big hoop that also embroiders on baseball caps use the same Attachment Bracket...So
you only need 1 complete kit and then you can buy the other hoop frames separately to
increase your hoop selection. |
Frames Sold separately can only be used if you already have the
Spacing base, Support table & attachment Bracket. If you do not, refer to the kits
above and then you can accessorize by purchasing additional hoops below. All 3 hoop frames
fit into the same bracket and use the same support table. |
Accessories sold Separately |
You
can also order the Big hoop with cap sewing feature
This hoop replaces the
large hoop for your machine and makes it so you can sew a larger design than you currently
can with the machine's large hoop. You can also use this hoop to embroider small designs. |
|
|
This hoop replaces the large hoop for your machine and
makes it so you can sew a larger design than you currently can with the machine's large
hoop. You can also use this hoop to embroider small designs. |
|
|
Order Replacement rolls of SIA now to save on shipping costs.
- Order
14.5" wide SIA for all three of the Double Wide hoops.
- Order
8.5" wide SIA for the Big hoop.
|
|
