Hoops for Babylock Ellegante Model Machines

Normally the Babylock Ellegante machines and the Brother 4000D can share the same hoops. However because the machines are shaped differently, you must at least have 2 separate spacing bases for the machines in order to share hoops.

6 Hoops 2 Double-Wide and 4 additional hoops listed below to choose from or buy them all for incredible versatility!

How can your sewing machine use these hoops?

With a specially designed spacing base, we s-t-r-e-t-c-h your sewing machine apart! In addition to a factory approved extension cord that tricks your machine into thinking it is connected the normal way.

See how much bigger our hoop is than your machine's largest hoop!

Double-Wide Hoop Spacing Base with Extension Cord and Deluxe Front & Back Table Supports

Back table is removed, machine slid back and front table supports hoop in front as you embroider the first section of the hoop.

Back table is removed, machine slid back, hoop is removed from within the sliding bracket. Both the hoop and the designs are rotated 180 degrees. Hoop is re-inserted into sliding bracket and the front table supports hoop as you embroider the third section of the hoop.

If your table is large enough to leave both the front and back sections of the table in-place simply disregard the table refrences on the above instructions.

The following hoops, use the same Attachment Bracket...So you only need 1 complete kit and then you can buy the other hoop frame separately to increase your hoop selection. The Super Giant-L hoop requires its own table and base.

DOUBLE WIDE HOOP KITS

Frames Sold separately can only be used if you already have the Spacing base, Support table & attachment Bracket. If you do not, refer to the kits above and then you can accessorize by purchasing additional hoops below. All 3 hoop frames fit into the same bracket and use the same support table.

Accessories sold Separately

You can also order the following hoops with cap sewing feature to add flexibility to your embroidery supplies.

This hoop replaces the large hoop for your machine and makes it so you can sew a larger design than you currently can with the machine's large hoop. You can also use this hoop to embroider small designs.

Medium hoop with clamp designed to hold baseball caps in place.
This hoop can be used in place of your machine's Medium hoop and with its specially designed clamp it holds baseball caps in place too! You never have to "Hoop" the fabric because you adhere our SIA to the back of the hoop and then simply lay your fabric on the sticky surface.

BIG hoop with clamp designed to hold baseball caps in place.
This hoop can be used in place of your machine's Large hoop and with its specially designed clamp it holds baseball caps in place too! You never have to "Hoop" the fabric because you adhere our SIA to the back of the hoop and then simply lay your fabric on the sticky surface.

BIG Multi-Use hoop with clamp designed to hold baseball caps in place.
This hoop can be used in place of your machine's Extra Large hoop and with its specially designed clamp it holds baseball caps in place too! You never have to "Hoop" the fabric because you adhere our SIA to the back of the hoop and then simply lay your fabric on the sticky surface.

***You can use purchase this hoop as a kit with bracket included or purchase as an accessory hoop to go along with any of the Giant hoops listed above. This hoop has a rail so that you can use the same bracket that comes with the Giant Hoop Kits. If you purchase any Giant hoop kit for this machine you will want the accessory hoop.

Item # GBLELSGL+T complete kit
Includes hoop, attachment bracket, standard support table, base and small roll of SIA . You cannot use the base and tables that come with the Double-Wide kits with this hoop frame.