DOUBLE-WIDE & 4 Times Longer than your sewing machine's hoop frame!

If your sewing machine's make and model is listed below, you may order the Giant-L Hoop-It-All separately, or as a kit.

If you already have the Giant Square Hoop-It-All and would like to have this alternative hoop, you may order the "Frame Only" because this hoop uses the same bracket and support table as the Giant Square Hoop.

If you do not yet have the Giant Square Hoop-It-All, you will need the "Giant-R Kit" as shown below.

You may either place your order online through our secure server or call toll free to speak to a person (800) 776-6938 Click here for our order policies. All Hoop-It-All Hoops require SIA stabilizer to use the hoop and though you will receive a small roll of stabilizer with your hoop frame we recommend that you order the kit with SIA to save on shipping.

To order, simply check your item, enter your quantity, and press the "Put these in my cart" button at the bottom of the page.

Pfaff 7560 & 7570 machines could not use the 8"x16" sewing field so we made the hoop just slightly narrower and longer. You will be able to sew out small 8 sewing fields to total Just under 8"x17" long. All other machines listed below can embroider 8 4" sewing fields in 1-hooping....

In order to sew out a SOLID design you MUST have software for your machine. You must be able to save your own designs onto discs for your machine and then you Must SPLIT your Large design into separate sewing fields.------You will sew down 1-side of the hoop......Then remove the hoop from the bracket and rotate your designs for the oposite side of the hoop. In order to overlap designs so that you do not see where the sewing fields meet----you will have to split into approximately 15 sewing fields. But you only have to hoop ONCE

Many programs include the Hoop-It-All hoops in the software to help you split your designs. If you need assistance in choosing a software program please Email us.